Question :
15) What the costs per equivalent unit for direct materials : 1186099
15) What are the costs per equivalent unit for direct materials and conversion respectively?
A) $2.00; $1.54
B) $1.45; $1.54
C) $2.11; $1.62
D) $2.11; $1.18
E) $2.00; $1.18
Use the information below to answer the following question(s).
Cartwright Custom Carpentry manufactures chairs in its Processing Department, and uses the FIFO cost flow assumption. Direct Materials are included at the inception of the production cycle and must be bundled in single kits for each unit. Conversion costs are incurred evenly throughout the production cycle. Inspection takes place at the end of the process and spoiled units generally constitute 3 percent of the good output Information provided for March is as follows:
WIP, Beginning inventory March 1
30,000 units
Direct materials: 100% complete
Conversion costs: 89.5% complete
Started during March
80,000 units
Completed & Transferred Out
86,000 units
WIP, Ending inventory March 31
20,000 units
Direct materials: 100% complete
Conversion costs: 75% complete
Costs:
WIP, Beginning Inventory:
Direct materials
$70,000
Conversion costs
40,000
Direct materials added
160,000
Conversion costs added
120,000
16) What costs are allocated to the ending work in process inventory for direct materials and conversion costs, respectively?
A) $28,250; $24,850
B) $30,000; $23,100
C) $30,000; $21,590
D) $39,500; $13,600
E) $40,000; $23,100
Use the information below to answer the following question(s).
Cartwright Custom Carpentry manufactures chairs in its Processing Department. Direct Materials are included at the inception of the production cycle and must be bundled in single kits for each unit. Conversion costs are incurred evenly throughout the production cycle. Inspection takes place at the end of the process and spoiled units generally constitute 3 percent of the good units. Data provided for March is as follows:
WIP, Beginning inventory March 1
30,000 units
Direct materials: 100% complete
Conversion costs: 89.5% complete
Started during March
80,000 units
Completed & Transferred Out
86,000 units
WIP, Ending inventory March 31
20,000 units
Direct materials: 100% complete
Conversion costs: 75% complete
Costs:
WIP, Beginning Inventory:
Direct materials
$70,000
Conversion costs
40,000
Direct materials added
160,000
Conversion costs added
120,000
17) What costs would be associated with normal and abnormal spoilage, respectively, using the FIFO method of process costing?
A) $5,890.64; $9,133.20
B) $5,890.64; $5,826.00
C) $6,469.64; $7,690.36
D) $7,690.36; $5,026.80
E) $9,133.20; $5,026.80
18) Which of the following journal entries correctly represents the transfer of completed goods for the current period using the FIFO method of process costing?
A)
Finished Goods
$10,560.28
Loss from Spoilage
$10,560.28
B)
Loss from Spoilage
$5,026.80
Finished Goods
$5,026.80
C)
Finished Goods
$311,500.00
Work in Process
$311,500.00
D)
Finished Goods
$401,700.00
Work in Process
$401,700.00
E)
Finished Goods
$322.224.20
Work in Process
$322,224.20
19) Boss Cycle generally has spoiled goods during each job. Costs are assigned to normal spoilage at $10.00 per unit and abnormal spoilage at $20.00 per unit. Disposal fees typically run $5.00 per item. Boss Cycle has a policy never to rework spoiled units. Management believes that once a unit is damaged it cannot be reworked into a quality product. The losses are charged back to the specific job.
What is the appropriate journal entry if 300 units are considered abnormal spoilage and are not disposed of in a process costing system?
A)
Loss from Abnormal Spoilage
$6,000
Work in Process Control
$6,000
B)
Work in Process Control
$1,500
Loss from Abnormal Spoilage
$1,500
C)
Loss from Abnormal Spoilage
$6,000
Inventory
$6,000
D)
Loss from Abnormal Spoilage
$1,500
Work in Process
$1,500
E)
Loss from Abnormal Spoilage
$1,500
Work in Process Control
$1,500
Answer the following question(s) using the information below.
Samantha’s Office Supplies manufactures desk organizers in its Processing Department. Direct materials are added at the beginning of the process and conversion costs are incurred evenly throughout the production cycle. Inspection takes place at the end of the process and spoiled units generally constitute 4% of the good units. Data provided for February are as follows:
WIP, beginning inventory February 1
25,000 units
Direct materials (100% complete)
Conversion costs (50% complete)
Started during February
82,000 units
Completed and transferred out
81,000 units
WIP, ending inventory February 28
15,000 units
Direct materials (100% complete)
Conversion costs (25% complete)
Costs:
WIP, beginning inventory:
Direct materials
$150,000
Conversion costs
44,000
Direct materials added
209,916
Conversion costs added
109,893
20) What are the normal and abnormal spoilage units, respectively, for February when using FIFO?
A) 1,400 units; 1,480 units
B) 3,280 units; 1,640 units
C) 3,240 units; 7,760 units
D) 3,240 units; 11,000 units
E) 7,760 units; 1,640 units
21) What costs would be associated with normal and abnormal spoilage, respectively, using the FIFO method of process costing?
A) $12,571; $30,108
B) $30,108; $12,571
C) $1,257; $3,010
D) $8,000; $4,000
E) $10,627; $25,453
22) What costs are allocated to the ending work-in-process inventory for direct materials and conversion costs, respectively, using the FIFO method of process costing?
A) $38,250; $4,850
B) $40,000; $23,100
C) $38,400; $4,950
D) $49,500; $38,400
E) $38,400; $19,800
23) Using the FIFO method of process costing, what are the total costs of all the units that were initially in the beginning work-in-process inventory and were subsequently shipped?
A) $194,000
B) $16,500
C) $210,500
D) $97,000
E) $274,500
24) What are the direct materials and conversion costs of all the units that were started and completed during February?
A) $314,280
B) $217,280
C) $318,160
D) $153,500
E) $143,360