Order Now

Question : 111) During the period of economic recovery between 1983 and : 1384476

Economics

 

111) During the period of economic recovery between 1983 and 1987, the main challenge for the Bank of Canada was to

A) accommodate the recovery, and the associated growth in money demand, without increasing the money supply so much as to refuel inflation.

B) decrease the money supply to dampen inflationary expectations.

C) increase the money supply so that only a mild form of inflation would reappear.

D) stabilize the exchange rate between the U.S. and Canadian dollars.

E) stabilize the unemployment rate.

112) The decision by the Bank of Canada and many other central banks to target the rate of inflation partly reflects the evidence of the

A) long-run neutrality of money.

B) link between the money supply and the exchange rate.

C) power of the overnight lending rate to affect long-run investment.

D) power of the overnight interest rate to affect consumer borrowing.

E) link between the output gap and the money supply.

113) In the early 1980s, when the Bank of Canada was focusing its attention on reducing the growth rate of the money supply, an unplanned surge in ________ led to an unintended tight monetary policy which caused ________.

A) money demand; decreased inflation and a serious recession

B) money supply; a drop in the overnight lending rate and increased investment

C) desired investment; inflation to increase

D) desired investment; the Bank of Canada to adopt a core inflation targeting policy

E) money supply; the Bank of Canada to apologize to the public for its policy error

114) In 1994, the federal minister of finance (Paul Martin) appointed Gordon Thiessen as the new governor of the Bank of Canada, who proceeded to

A) continue the tough and unpopular contractionary monetary policy of his predecessor.

B) continue the popular low overnight lending policy of his predecessor.

C) abandon the tough and unpopular contractionary monetary policy of his predecessor in favour of a policy designed to depreciate the Canadian dollar.

D) abandon the tough and unpopular contractionary monetary policy of his predecessor in favour of a low-interest-rate policy.

E) increase the overnight lending rate in order to stabilize the Canadian-U.S. exchange rate.

115) What is the policy response by the Bank of Canada to an inflationary gap in one region of Canada (e.g. the West) when at the same time a recessionary gap exists in another region of Canada (e.g. Ontario)?

A) Each regional office of the Bank of Canada implements the appropriate monetary policy for that region.

B) The Bank of Canada implements monetary policy in each region of Canada as required.

C) There are automatic stabilizers inherent in monetary policy that allow the policy to adjust to close the output gap.

D) The Bank of Canada consults with the commercial banks on the appropriate level of deposit creation for each region of the country.

E) The Bank of Canada responds to the average level of inflation in the country and implements a single monetary policy.

116) In 2007 and 2008, Canada was affected by the global financial crisis that had begun with the U.S. housing collapse. What actions did the Bank of Canada take between the fall of 2007 and the end of 2008 in an attempt to maintain the level of economic activity in Canada? The Bank of Canada

A) maintained its target for the overnight rate and made short-term loans to financial institutions more accessible.

B) implemented a large fiscal stimulus program to counteract the sharp rise in interest rates that had occurred.

C) reduced its target for the overnight rate by over 3.5 percentage points and made short-term loans to financial institutions more accessible.

D) reduced its target for the overnight rate by over 5 percentage points and purchased “toxic” assets from Canadian commercial banks.

E) purchased “toxic” assets from Canadian commercial banks and implemented a large fiscal stimulus program.

117) In 2007 and 2008, Canada was affected by the global financial crisis that had begun with the U.S. housing collapse. By the spring of 2009, the Bank of Canada had reached a practical minimum for its nominal policy interest rate of ________%.

A) 0

B) 0.25

C) 0.50

D) 0.75

E) 1.00

118) In 2007 and 2008, Canada was affected by the global financial crisis that had begun with the U.S. housing collapse. By early 2009, the Canadian economy was in a recession with Y < Y*. What economic policies were implemented to close the output gap? A) expansionary monetary policy B) expansionary fiscal policy C) contractionary monetary policy and contractionary fiscal policy D) contractionary monetary policy and expansionary fiscal policy E) expansionary monetary policy and expansionary fiscal policy 119) In 2007 and 2008, Canada was affected by the global financial crisis that had begun with the U.S. housing collapse. By 2009, the Canadian economy had entered a recession, largely due to a reduction in investment and a ________. The policy objective for the Bank of Canada and the government at this time was to ________. A) fall in net exports; shift the AD curve to the right to close the recessionary output gap B) fall in consumption; shift the AD curve to the right to close the inflationary output gap C) fall in consumption; shift the AD curve to the left to close the recessionary output gap D) fall in net exports; shift the AS curve to close the inflationary output gap E) fall in housing starts; shift the AD curve to the left to close the recessionary output gap 120) During the financial crisis that began in 2008 the Bank of Canada took actions to increase the amount of reserves in the banking system (they were "injecting liquidity"). However, the money supply (M2+) did not increase as predictably as it would have at other times. Why not? A) The banks formally increased their target reserve ratios to over 40% due to the increased risks in the Canadian economy. B) The panic in the world's financial sector led to a massive reduction in all types of lending from financial institutions. C) The banks formally increased their target reserve ratios to 20% due to the increased risks in the Canadian economy. D) The large and sudden increase in excess reserves at the commercial banks led to a significant increase in lending and a subsequent reduction in M2+. E) The panic in the world's financial sector led to a massive increase in all types of lending from financial institutions.    

Continue to order Get a quote
Place your order
(550 words)

Approximate price: $22

July 1, 2023
    

 

111. The debits to Work in Process--Assembly Department for April, together with data concerning production, are as follows: 

April 1, work in process:

 

  Materials cost, 3,000 units

$  7,500

  Conversion costs, 3,000 units,

 

    2/3 completed

6,000

Materials added during April, 10,000 units

26,000

Conversion costs during April

31,000

Goods finished during April, 11,500 units

---

April 30 work in process, 1,500 units,

 

  1/2 completed

---

 

 

All direct materials are placed in process at the beginning of the process and the average cost method is used to cost inventories. The materials cost per equivalent unit (to the nearest cent) for April is: A. $2.60B. $2.58C. $3.02D. $2.26

112. The debits to Work in Process--Assembly Department for April, together with data concerning production, are as follows: 

April 1, work in process:

 

  Materials cost, 3,000 units

$  7,500

  Conversion costs, 3,000 units,

 

    2/3 completed

6,000

Materials added during April, 10,000 units

26,000

Conversion costs during April

31,000

Goods finished during April, 11,500 units

---

April 30 work in process, 1,500 units,

 

  1/2 completed

---

 

 

All direct materials are placed in process at the beginning of the process and the average cost method is used to cost inventories. The conversion cost per equivalent unit (to the nearest cent) for April is: A. $2.70B. $2.53C. $3.02D. $5.60

113. Department E had 4,000 units in Work in Process that were 40% completed at the beginning of the period at a cost of $12,500. 14,000 units of direct materials were added during the period at a cost of $28,700. 15,000 units were completed during the period, and 3,000 units were 75% completed at the end of the period. All materials are added at the beginning of the process. Direct labor was $32,450 and factory overhead was $18,710. The number of equivalent units of production for the period for conversion if the average cost method is used to cost inventories was: A. 15,650B. 14,850C. 18,000D. 17,250

114. Department E had 4,000 units in Work in Process that were 40% completed at the beginning of the period at a cost of $12,500. 14,000 units of direct materials were added during the period at a cost of $28,700. 15,000 units were completed during the period, and 3,000 units were 75% completed at the end of the period. All materials are added at the beginning of the process. Direct labor was $32,450 and factory overhead was $18,710. The number of equivalent units of production for the period for materials if the average cost method is used to cost inventories was: A. 15,650B. 18,000C. 17,250D. 17,700

115. Department E had 4,000 units in Work in Process that were 40% completed at the beginning of the period at a cost of $12,500. Of the $12,500, $8,000 was for material and $4,500 was for conversion costs. 14,000 units of direct materials were added during the period at a cost of $28,700. 15,000 units were completed during the period, and 3,000 units were 75% completed at the end of the period. All materials are added at the beginning of the process. Direct labor was $32,450 and factory overhead was $18,710. If the average cost method is used the material cost per unit (to the nearest cent) would be: A. $2.04B. $1.59C. $1.91D. $2.00

116. Department E had 4,000 units in Work in Process that were 40% completed at the beginning of the period at a cost of $12,500. Of the $12,500, $8,000 was for material and $4,500 was for conversion costs. 14,000 units of direct materials were added during the period at a cost of $28,700. 15,000 units were completed during the period, and 3,000 units were 75% completed at the end of the period. All materials are added at the beginning of the process. Direct labor was $32,450 and factory overhead was $18,710. Department E had 4,000 units in Work in Process that were 40% completed at the beginning of the period at a cost of $12,500. Of the $12,500, $8,000 was for material and $4,500 was for conversion costs. 14,000 units of direct materials were added during the period at a cost of $28,700. 15,000 units were completed during the period, and 3,000 units were 75% completed at the end of the period. All materials are added at the beginning of the process. Direct labor was $32,450 and factory overhead was $18,710. If the average cost method is used the conversion cost per unit (to the nearest cent) would be: A. $3.71B. $2.84C. $2.97D. $3.23

117. Which of the following industries would normally use job order costing systems and which would normally use process costing systems?Business consultingChemicalsFoodMovieSoap and cosmeticsWeb designer 

Business consultantJob Order

ChemicalsProcess

FoodProcess

Movie studioJob Order

Soap and cosmeticsProcess

Web designerJob order

118. The Desert Springs Water Company has two departments. Purifying and Bottling. The Bottling Department received 62,000 liters from the Purifying Department. During the period, the Bottling Department completed 60,000 liters, including 3,000 liters of work in process at the beginning of the period. The ending work in process was 5,000 liters. How many liters were started and completed during the period? 

57,000 liters started and completed (60,000 completed - 3,000 beginning WIP)

 

default image
July 1, 2023
    

 

111. The debits to Work in Process--Assembly Department for April, together with data concerning production, are as follows: 

April 1, work in process:

 

  Materials cost, 3,000 units

$  7,500

  Conversion costs, 3,000 units,

 

    2/3 completed

6,000

Materials added during April, 10,000 units

26,000

Conversion costs during April

31,000

Goods finished during April, 11,500 units

---

April 30 work in process, 1,500 units,

 

  1/2 completed

---

 

 

All direct materials are placed in process at the beginning of the process and the average cost method is used to cost inventories. The materials cost per equivalent unit (to the nearest cent) for April is: A. $2.60B. $2.58C. $3.02D. $2.26

112. The debits to Work in Process--Assembly Department for April, together with data concerning production, are as follows: 

April 1, work in process:

 

  Materials cost, 3,000 units

$  7,500

  Conversion costs, 3,000 units,

 

    2/3 completed

6,000

Materials added during April, 10,000 units

26,000

Conversion costs during April

31,000

Goods finished during April, 11,500 units

---

April 30 work in process, 1,500 units,

 

  1/2 completed

---

 

 

All direct materials are placed in process at the beginning of the process and the average cost method is used to cost inventories. The conversion cost per equivalent unit (to the nearest cent) for April is: A. $2.70B. $2.53C. $3.02D. $5.60

113. Department E had 4,000 units in Work in Process that were 40% completed at the beginning of the period at a cost of $12,500. 14,000 units of direct materials were added during the period at a cost of $28,700. 15,000 units were completed during the period, and 3,000 units were 75% completed at the end of the period. All materials are added at the beginning of the process. Direct labor was $32,450 and factory overhead was $18,710. The number of equivalent units of production for the period for conversion if the average cost method is used to cost inventories was: A. 15,650B. 14,850C. 18,000D. 17,250

114. Department E had 4,000 units in Work in Process that were 40% completed at the beginning of the period at a cost of $12,500. 14,000 units of direct materials were added during the period at a cost of $28,700. 15,000 units were completed during the period, and 3,000 units were 75% completed at the end of the period. All materials are added at the beginning of the process. Direct labor was $32,450 and factory overhead was $18,710. The number of equivalent units of production for the period for materials if the average cost method is used to cost inventories was: A. 15,650B. 18,000C. 17,250D. 17,700

115. Department E had 4,000 units in Work in Process that were 40% completed at the beginning of the period at a cost of $12,500. Of the $12,500, $8,000 was for material and $4,500 was for conversion costs. 14,000 units of direct materials were added during the period at a cost of $28,700. 15,000 units were completed during the period, and 3,000 units were 75% completed at the end of the period. All materials are added at the beginning of the process. Direct labor was $32,450 and factory overhead was $18,710. If the average cost method is used the material cost per unit (to the nearest cent) would be: A. $2.04B. $1.59C. $1.91D. $2.00

116. Department E had 4,000 units in Work in Process that were 40% completed at the beginning of the period at a cost of $12,500. Of the $12,500, $8,000 was for material and $4,500 was for conversion costs. 14,000 units of direct materials were added during the period at a cost of $28,700. 15,000 units were completed during the period, and 3,000 units were 75% completed at the end of the period. All materials are added at the beginning of the process. Direct labor was $32,450 and factory overhead was $18,710. Department E had 4,000 units in Work in Process that were 40% completed at the beginning of the period at a cost of $12,500. Of the $12,500, $8,000 was for material and $4,500 was for conversion costs. 14,000 units of direct materials were added during the period at a cost of $28,700. 15,000 units were completed during the period, and 3,000 units were 75% completed at the end of the period. All materials are added at the beginning of the process. Direct labor was $32,450 and factory overhead was $18,710. If the average cost method is used the conversion cost per unit (to the nearest cent) would be: A. $3.71B. $2.84C. $2.97D. $3.23

117. Which of the following industries would normally use job order costing systems and which would normally use process costing systems?Business consultingChemicalsFoodMovieSoap and cosmeticsWeb designer 

Business consultantJob Order

ChemicalsProcess

FoodProcess

Movie studioJob Order

Soap and cosmeticsProcess

Web designerJob order

118. The Desert Springs Water Company has two departments. Purifying and Bottling. The Bottling Department received 62,000 liters from the Purifying Department. During the period, the Bottling Department completed 60,000 liters, including 3,000 liters of work in process at the beginning of the period. The ending work in process was 5,000 liters. How many liters were started and completed during the period? 

57,000 liters started and completed (60,000 completed - 3,000 beginning WIP)

 

default image
July 1, 2023
    

 

111. The debits to Work in Process--Assembly Department for April, together with data concerning production, are as follows: 

April 1, work in process:

 

  Materials cost, 3,000 units

$  7,500

  Conversion costs, 3,000 units,

 

    2/3 completed

6,000

Materials added during April, 10,000 units

26,000

Conversion costs during April

31,000

Goods finished during April, 11,500 units

---

April 30 work in process, 1,500 units,

 

  1/2 completed

---

 

 

All direct materials are placed in process at the beginning of the process and the average cost method is used to cost inventories. The materials cost per equivalent unit (to the nearest cent) for April is: A. $2.60B. $2.58C. $3.02D. $2.26

112. The debits to Work in Process--Assembly Department for April, together with data concerning production, are as follows: 

April 1, work in process:

 

  Materials cost, 3,000 units

$  7,500

  Conversion costs, 3,000 units,

 

    2/3 completed

6,000

Materials added during April, 10,000 units

26,000

Conversion costs during April

31,000

Goods finished during April, 11,500 units

---

April 30 work in process, 1,500 units,

 

  1/2 completed

---

 

 

All direct materials are placed in process at the beginning of the process and the average cost method is used to cost inventories. The conversion cost per equivalent unit (to the nearest cent) for April is: A. $2.70B. $2.53C. $3.02D. $5.60

113. Department E had 4,000 units in Work in Process that were 40% completed at the beginning of the period at a cost of $12,500. 14,000 units of direct materials were added during the period at a cost of $28,700. 15,000 units were completed during the period, and 3,000 units were 75% completed at the end of the period. All materials are added at the beginning of the process. Direct labor was $32,450 and factory overhead was $18,710. The number of equivalent units of production for the period for conversion if the average cost method is used to cost inventories was: A. 15,650B. 14,850C. 18,000D. 17,250

114. Department E had 4,000 units in Work in Process that were 40% completed at the beginning of the period at a cost of $12,500. 14,000 units of direct materials were added during the period at a cost of $28,700. 15,000 units were completed during the period, and 3,000 units were 75% completed at the end of the period. All materials are added at the beginning of the process. Direct labor was $32,450 and factory overhead was $18,710. The number of equivalent units of production for the period for materials if the average cost method is used to cost inventories was: A. 15,650B. 18,000C. 17,250D. 17,700

115. Department E had 4,000 units in Work in Process that were 40% completed at the beginning of the period at a cost of $12,500. Of the $12,500, $8,000 was for material and $4,500 was for conversion costs. 14,000 units of direct materials were added during the period at a cost of $28,700. 15,000 units were completed during the period, and 3,000 units were 75% completed at the end of the period. All materials are added at the beginning of the process. Direct labor was $32,450 and factory overhead was $18,710. If the average cost method is used the material cost per unit (to the nearest cent) would be: A. $2.04B. $1.59C. $1.91D. $2.00

116. Department E had 4,000 units in Work in Process that were 40% completed at the beginning of the period at a cost of $12,500. Of the $12,500, $8,000 was for material and $4,500 was for conversion costs. 14,000 units of direct materials were added during the period at a cost of $28,700. 15,000 units were completed during the period, and 3,000 units were 75% completed at the end of the period. All materials are added at the beginning of the process. Direct labor was $32,450 and factory overhead was $18,710. Department E had 4,000 units in Work in Process that were 40% completed at the beginning of the period at a cost of $12,500. Of the $12,500, $8,000 was for material and $4,500 was for conversion costs. 14,000 units of direct materials were added during the period at a cost of $28,700. 15,000 units were completed during the period, and 3,000 units were 75% completed at the end of the period. All materials are added at the beginning of the process. Direct labor was $32,450 and factory overhead was $18,710. If the average cost method is used the conversion cost per unit (to the nearest cent) would be: A. $3.71B. $2.84C. $2.97D. $3.23

117. Which of the following industries would normally use job order costing systems and which would normally use process costing systems?Business consultingChemicalsFoodMovieSoap and cosmeticsWeb designer 

Business consultantJob Order

ChemicalsProcess

FoodProcess

Movie studioJob Order

Soap and cosmeticsProcess

Web designerJob order

118. The Desert Springs Water Company has two departments. Purifying and Bottling. The Bottling Department received 62,000 liters from the Purifying Department. During the period, the Bottling Department completed 60,000 liters, including 3,000 liters of work in process at the beginning of the period. The ending work in process was 5,000 liters. How many liters were started and completed during the period? 

57,000 liters started and completed (60,000 completed - 3,000 beginning WIP)

 

default image
Essay (any type)
August 22, 2022
    

They have a magnificent team. These people are always kind and willing to listen to your concerns or issues. Better yet, your assignment is always ready before the time, they usually send you a draft to double-check before they finalize your paper.

 

default image
Customer #32567
Zoology, 8 Pages
Case study
August 22, 2022
    

Completed quickly and followed instructions given. Grammar, spelling, etc. was all good as well. Thank you so much! Will hire in the future.

default image
Customer #30093
Biology (and other Life Sciences), 6 pages
Presentation/PPT
August 22, 2022
    

The work has not been graded but I like the output that was submitted to me. Is it possible for the same prof to do the next assignment I will be submitting? If possible, I will greatly appreciate it.

default image
Customer #37612
Computer science, 8 pages
Journal article
August 22, 2022
    

My third using this writer and absolutely amazing work! Very punctual and very understanding.

default image
Customer #34820
Agriculture, 4 pages
Article
August 22, 2022
    

Outstanding job in writing my paper. I am always thrill to receive a well written paper that follows the instructions and the thorough details put into my paper. The quality of this paper is beyond awesome. Thank you so much.

default image
Customer #17907
Technology, 5 pages
Thesis/Thesis chapter
August 22, 2022
    

I absolutely love this writer! He/she always cranks out a fabulous paper and follows the assignment guidelines/instructions perfectly. Thanks again for always providing such quality work!!!

default image
Customer #32146
Economics, 9 pages
Research paper
August 22, 2022
    

It took some time to achieve the product I was looking for, but we eventually got there. I do feel like a lot of hard work was put into this, and it even exceeded the page requirement. I'm pretty pleased overall. I give my thanks.

default image
Customer #22371
Ecology, 5 pages
Lab Report
August 22, 2022
    

Outstanding work! This writer followed every instruction and my paper came back with an A! I recommend to anyone needing help! Thank you again ❤️

default image
Customer #13712
Nursing, 6 pages
Outline
August 22, 2022
    

Outstanding job in writing my paper. I am always thrill to receive a well written paper that follows the instructions and the thorough details put into my paper. The quality of this paper is beyond awesome. Thank you so much.

default image
Customer #267302
IT, Web, 6 pages
Essay (any type)
August 22, 2022
    

Made 100% on both the outline and the paper. Quick turnaround time and my writer responded within 30 min or less. Any edits my instructor needed, my writer was patient and worked diligently to accomplish the task. Would recommend my writer to anyone!

default image
Customer #14472
International Trade, 8 pages
Essay (any type)
August 5, 2021
    

You are making my life so much easier! I am a single mom that works and goes to school. You guys are helping me with my projects so I can have more free time with my son.

default image
customer #13832
Tourism, 3 pages
Annotated Bibliography
August 5, 2021
    

I was sure it can fit in a single page but the next time I will add one more page because I am impressed with your professionalism and quality. Will use many more times till I graduate.

default image
customer #12008
Management, 7 pages
Essay (any type)
August 5, 2021
    

Simple registration and quality services. I just ordered one paper, and it was good enough to pass the exam. That is what I need the most. Good job.

default image
customer #16257
Communication, 4 pages
Research Proposal
August 5, 2021
    

I couldn’t finish my freaking essay, and I was very desperate. A friend of mine sent me a link, and that is how I found out about you guys. Thank you for professional tips and editing. Now, I understand how to write it properly.

default image
customer #17128
Law, 5 pages
Reflection
August 5, 2021
    

I’m so grateful to you since you managed to complete my term paper in one day! You are definitely the best company ever!

default image
customer #16528
Public Relations, 7 pages
Essay (any type)
August 5, 2021
    

I am sure on your ability to provide any type of paper I will order. I wish I could develop that skill your writers have to be able to have a flow of ideas and excellent sequencing of thoughts in writing.

default image
customer #19552
Medicine, 5 pages
Coursework
August 5, 2021
    

I ordered a thesis paper and was satisfied. All the guys were polite and highly professional, even when I wrote to them several times per day. Thanks for your passion!

default image
customer #20376
Nursing, 6 pages
Discussion Essay
August 5, 2021
    

I turned to the service twice, and my papers always were beyond the expectations. To tell the truth, I was ready to find some grammar errors or something like that. However, everything was neat and tidy.

default image
customer #18529
Marketing, 1 page
August 5, 2021

My friend recommended Doctor My Essay to me. It is convenient! Now we both turn to the service periodically coz wanna save some time and use it more effectively. I know that while I’m developing my startup, an expert is working on paper. Time management in work!

default image
Research Paper
August 5, 2021
    

I write all paper works by myself but have some problems with literacy. Actually, I have enormous problems because English is not my native language. However, with proofreading from Doctor My Essay, I can relax and don’t be ashamed of mistakes.

default image
customer #12924
Business, 7 pages
Argumentative Essay
August 5, 2021
    

Your ability to write concisely is a finding. The paper has a solid argument. It’s clear that the writer understood central claim about the topic. He also presented original ideas to consider.

default image
customer #19304
Management, 3 pages
Coursework
August 5, 2021
    

That paper got the highest grade in my class and the professor thinks I’m the smartest student. Lol.

default image
customer #12387
Accounting, 6 pages
Essay (any type)
August 5, 2021
    

I was convinced that paper writing services are the fiction for naive students. But when it came to my research paper that was to be composed in 72 hours, I had no other options. I made the right choice when I ordered it from you!

default image
customer #12924
Ethics, 4 pages
Business Plan
August 5, 2021
    

I was also satisfied with the service. Usually, I write everything by myself, but this time ( I have no idea how it happens!) I missed the deadline. My writer was very responsible, wrote the essay quickly, and kept the instructions. Nice to know that such experts exist!

default image
customer #15677
Marketing, 10 pages
Annotated Bibliography
August 5, 2021
    

It is really affordable! The prices start from 9$, which is an excellent proposal on the market. Recently I worked with another service that took much more money and provided lower quality papers.

default image
customer #11234
Sociology, 9 pages
Research proposal
August 5, 2021
    

I am absolutely satisfied. I am first timer here. Revision was made quickly, and the author met my expectations. Thanks a lot. Paper is phenomenal.

default image
customer #15327
Economics, 5 pages
Essay (any type)
August 5, 2021
    

Having heard a lot of negative reviews about such services, I was a bit skeptical. However, our cooperation with Doctor My Essay was without pitfalls. I made two comments about the final work, and they re-wrote some parts very promptly. I am satisfied and will turn to them in the future.

default image
customer #17823
Human Resource Management, 2 pages
Research paper
August 5, 2021
    

It was my first experience in online ordering, and I was a bit nervous. However, this was for nothing. I’ve got a high mark!

default image
customer #12372
Public Relations, 3 pages
Dissertation
August 5, 2021
    

I understand that buying essays is a doubtful thing. You don’t put effort, don’t represent your ideas… However, I don’t perceive Doctor My Essay as a standard service. They don’t sell papers. They share high expertise!

default image
customer #12376
Journal article, 20 pages
Coursework
August 5, 2021
    

According to my previous experience, this service is really the best. They support the client and have competitive writers. I give them a perfect score!

default image
customer #19266
Political Science, 6 pages
Admission Essay
August 5, 2021
    

Nice service! It is cool that you can use the calculator on the main page and understand the price policy. For me, it is a huge plus!

default image
customer #11437
Tourism, 1 page
Discussion Essay
August 5, 2021
    

Thanks to God I found this service! If I didn’t send my research to the teacher on time, he would eat me. I tell you! However, with doctor my essay service, I met the deadline, and I am still alive.

default image
customer #12692
Philosophy, 5 pages
Report
August 5, 2021
    

Your service is excellent! Convenient and not expensive. Thanks for that!

default image
customer #10923
Psychology, 4 pages
Essay (any type)
August 5, 2021
    

If you have problems with time management, just like me, you need to cooperate with Doctor My Essay. Once you registered and made the order, you understand how easier it makes your life! Everything is online: ordering, communication… You can control the process everywhere and be sure that an expert will provide a high-level paper.

default image
customer #17823
Business, 8 pages

Calculate the price of your order

550 words
We'll send you the first draft for approval by September 11, 2018 at 10:52 AM
Total price:
$26
The price is based on these factors:
Academic level
Number of pages
Urgency
Basic features
  • Free title page and bibliography
  • Unlimited revisions
  • Plagiarism-free guarantee
  • Money-back guarantee
  • 24/7 support
On-demand options
  • Writer’s samples
  • Part-by-part delivery
  • Overnight delivery
  • Copies of used sources
  • Expert Proofreading
Paper format
  • 275 words per page
  • 12 pt Arial/Times New Roman
  • Double line spacing
  • Any citation style (APA, MLA, Chicago/Turabian, Harvard)

Our guarantees

Delivering a high-quality product at a reasonable price is not enough anymore.
That’s why we have developed 5 beneficial guarantees that will make your experience with our service enjoyable, easy, and safe.

Money-back guarantee

You have to be 100% sure of the quality of your product to give a money-back guarantee. This describes us perfectly. Make sure that this guarantee is totally transparent.

Read more

Zero-plagiarism guarantee

Each paper is composed from scratch, according to your instructions. It is then checked by our plagiarism-detection software. There is no gap where plagiarism could squeeze in.

Read more

Free-revision policy

Thanks to our free revisions, there is no way for you to be unsatisfied. We will work on your paper until you are completely happy with the result.

Read more

Privacy policy

Your email is safe, as we store it according to international data protection rules. Your bank details are secure, as we use only reliable payment systems.

Read more

Fair-cooperation guarantee

By sending us your money, you buy the service we provide. Check out our terms and conditions if you prefer business talks to be laid out in official language.

Read more